Blog, Products

Odyssey Key Chain Sneek Peak Update

Odyssey’s upcoming Key chain will be out early 2013, but they already have informations that would like to share with your. Hoang Tran, Gary Young and Mike Taylor are currently testing out prototypes to see if any more changes need to be done.
Here are the informations about it:
“1. Oversize Pins. Traditional chain pins are 3mm in diameter, ours are 5mm. This not only makes them stronger but gives a bigger contact with the plates and so makes them harder to push or bend out. Additionally, the pins are riveted in place. Available in Hollow and Solid pin versions.
2. Thicker but lower profile side plates. With an extra narrow waist to each plate they are harder to catch on things. But at 1.4mm thick they are substantially thicker than the plates on any other chain and 50% harder to bend than the thickest existing 1.2mm chain plates.
3. Unique Master and Half links with threaded pins. Break and re-join the chain with just a 3mm hex key. Half link plates are less narrowed at the bends to increase stiffness and minimise stretch. By eliminating the use of a chain breaker to re-join the chain we can ensure factory tightness on all the pins.
4. Low overall weight. By using material as efficiently as possible we have strengthened every component of the chain and kept the weight the same as our Bluebird chain.
5. Low stretch. By using a standard alternating plate pattern and limiting to a single beefed up half link chain stretch is minimised, which in turn maximises sprocket and driver lifespan.”



Leave a Reply

You must be logged in to post a comment.